← Plugin catalog
Other

HomeLoad

Datacleave Ltd v1.0.4

Size home AC, generator, panel

Create a free account to save this plugin.

From the developer

Declared capabilities

  • Interactive

Cost & access

HomeLoad does not sell products, take payments or process transactions. Its 'Get my installer sheet' or 'Get my electrician sheet' button opens the HomeLoad website (our own domain), which shows the sizing sheet and links to third-party installer directories; those links pass through our site, which counts clicks and attaches no referral code.

Declared limitations

  • A maintenance question with nothing to size. HomeLoad must not be called; ChatGPT answers from its own knowledge.
  • A brand-comparison question. HomeLoad sizes equipment and never recommends brands, so it must not be called.
  • A commercial building. HomeLoad covers single-family houses only and must not be called for a warehouse rooftop unit.

Onboarding example

A contractor quoted 4 tons for my 1,800 sq ft house in Austin. Is that the right size?
Sources & dates

Developer declarations; not independently tested. Listing last checked Nov 18, 2026. Package observed Nov 18, 2026.

View package source →

Description

From the marketplace listing

Get the AC or heat-pump size, generator size or electrical-panel headroom for a US house, or check a size a contractor quoted. Tell HomeLoad your city or ZIP code and square feet; the result shows the county design temperatures and the standards behind it. Every card says what the figures were checked against. AC, heat pump or furnace: the cooling and heating load from floor area, stories, insulation and windows, using the county's 1% cooling and 99% heating design temperatures (EPA ENERGY STAR county reference, ASHRAE and ACCA Manual J values) and its IECC 2021 climate zone, then the range of equipment sizes in tons that ACCA Manual S allows for that load, what a heat pump of that size puts out at the design temperature, and the backup heat it leaves. Generator: tick the appliances to keep running in an outage and get running watts, starting watts (the largest motor surge added once, the way manufacturers' sizing guides do it) and the portable or home-standby class that covers them, with fuel figures for standby units, or check whether a generator you have will run them. Electrical panel headroom: the NEC 220.83 optional calculation for an existing dwelling, step by step: general lighting by floor area, the fixed appliances at nameplate, the demand factors, then the EV charger, heat pump or appliance you want to add, with a fits / tight / upgrade verdict and the breaker size the new circuit needs. Every result is an estimate with its inputs and a stated band, to confirm with a contractor's full Manual J or a licensed electrician. A 'Get my installer sheet' button opens the HomeLoad website with the figures, the questions to ask and where to ask them. HomeLoad needs no account and never asks for an address.

Language: English · Automatically detected from descriptions.

Changes

No changes recorded yet. Follow this plugin to keep track of future changes.

First seen Nov 18, 2026. Last seen Nov 18, 2026.

Similar plugins

Finding similar plugins… Results will appear here automatically.

Browse plugins →

Keywords

Files & skills

File archives

Plugin package5 files · 5.88 KBBrowse files →
Skill instructions
homeload3.38 KB

View saved version →

---
name: homeload
description: Size a home's air conditioner, heat pump or furnace, size a portable or standby generator, or check whether an existing electrical panel can take a new load such as an EV charger or heat pump, for houses in the US by city or ZIP code. Use when a user asks what size system their house needs, whether a quoted size is right, or whether their panel has room.
---

# HomeLoad workflow

Use the connected HomeLoad tools whenever the task is sizing residential HVAC, a generator, or
electrical-panel capacity for a house in the United States.

## Tools
- `size_hvac` — cooling and heating load and the Manual S tonnage range from ZIP, square feet
  and construction. Needs conditioned square feet and where the house is. A city and state is enough:
  pick a residential ZIP code in that city rather than asking, and name the county the result used. Never use a place
  the user has not stated, and never ask for a street address.
- `size_generator` — running and starting watts and the generator class from a list of load ids
  (plus custom loads with nameplate watts). Ask which appliances matter before listing a whole house.
- `panel_headroom` — NEC 220.83 calculation for an existing service: ZIP, square feet, panel
  rating, existing 240 V appliances, and what is being added. Set `strip_kw` when a heat pump
  with electric auxiliary heat is added.

## Behaviour
- Every result is a range or a calculated figure with its inputs; present it as an estimate to
  confirm with a contractor's Manual J or a licensed electrician. Keep the tool's note; do not
  raise the certainty.
- The card shows the range, a scale with the Manual S band, the assumptions, how the size
  moves if the insulation differs (`sensitivity`), what the figures were checked against (`basis`)
  and a button that opens an installer or electrician sheet. Write three sentences: the range; the one assumption
  that moves it most, taken from `sensitivity`; that a contractor's Manual J (or a licensed
  electrician) confirms it. Do not repeat the card's table or basis, and do not paste the link
  unless the card fails to load.
- When the user is checking a contractor's number or an installed unit ("they said 4 tons"), pass it
  as `quoted_tons`, ask the year built and the window type before calling if they are not given, and
  lead with the verdict in `quote_text`. A "near" verdict is not a finding against the contractor.
- When the user asks whether a generator they have will run the loads, pass its running rating as
  `have_kw` in kW (7.5 for 7,500 W), and `have_starting_kw` if known. An advertised peak is not the
  running rating: ask if unsure.
- `size_hvac` gives a heat pump's output at the design temperature and the backup it leaves
  (`heat_pump_text`). If the user then asks about the panel, pass `backup_strip_kw` as `strip_kw`.
- Do not recommend brands or models, quote prices, or advise on financing.
- Do not use the tools for commercial buildings, single rooms, RVs, job sites, subpanels or
  three-phase services, or for homes outside the 50 US states and DC.
- If a tool reports an unknown ZIP code you picked, try a nearby residential ZIP. If the user typed it, say it was not
  found and which ZIP you used instead; if it reports invalid
  input, relay the message and ask for the corrected value.

If the tools are unavailable, say that the HomeLoad sizing service could not be reached. Do not
fabricate a HomeLoad result.

Release notes

Initial release: AC and heat-pump sizing by city or ZIP code, generator sizing, and NEC 220.83 panel headroom.

Declared in the saved package. Remote tools may change independently.

Package details

Publisher declarations from the archived package. These are separate from our research and the live service's terms.

Package license
UNLICENSED
Package author
Datacleave Ltd
Keywords
See keywords
Commerce declaration
Does not support commerceThis does not establish whether access is free or paid.
Review scenarios
5 positive · 3 negativeScenario counts, not test results.

Declared capabilities

  • Interactive

Package observed Nov 18, 2026.

Technical details
First seen
Nov 18, 2026 · 06:00 UTC
Last seen
Nov 18, 2026 · 06:00 UTC
Collection status
Collected

plugin_asdk_app_6aebc7ff85a48191a3ed4d93681a6225

Download plugin data (JSON)

Plugin details: freshly prepared. Prepared . Refreshed when plugin data changes or after 6 hours. Your account and Follow status are live.